产品简介

SG-3045 stamp mill is the company to meet the needs of various laboratories, carefully designed and refined processing of production

Features: This machine is small size, low power consumption and high efficiency.

Technical parameters:
Power supply voltage: AC 220V50Hz
Motor power: 120w
Speed range: start -12 000 r / min
Timing range :0-60
Capacity range :50-1000ml
Dimensions: 28 × 22 × 48cm

SG-3045 stamp mill in all related industries with a wide range of purposes:
1． Science: biochemistry, plant nutrition research can use this machine
2． Medical treatment: Laboratory and drugs can be used, particularly for organizations therapy drugs mashed。
3． Pharmaceutical Chemicals: Manufacturing colloid emulsion, and solid liquid mixture of substances。
4．Bio-manufacturing products：In the biopharmaceutical manufacturing process，The mixing of  liquid drugs And microbial culture medium of mashed need to be carried out under aseptic operation，The equipment required to tight disinfection，To prevent bacteria infection。
5． Food industry: for manufacturing meat sauce, cheese, etc. for mixing with mashed。

Use method
1 First, the motor with broken bars move up the junction，So that it can remove the Stirring rod，Pick up cup，the required  material and solution by adding crushed  mashed cups，Fitted cup and stick tightly closed lid。
2 This timer knob，Rotation in the ON （normally open） position or location of the specified time you need。
3 The speed control knob counter-clockwise rotation to the 0 position，Power on, turn the power switch，Indicator light，Then speed control knob clockwise to the speed you need，homogenate used for mixing, the low speed you can.。crushing plants should be used for high-speed。
4 When replacement solution，Power supply should be cut off again after the operation。

Attention：
1 The machine adopts 3 safety sockets，Must be connected to  ground  prior to use。
2 Work should place the product flat fastening of the table, in order to prevent vibration transfer, high-speed broken, the application of hand-hold the lid。
3 Even more difficult to slide up and down shaft section, should inject one or two drops of oil to the lubrication。
4 forbid to broken bones, minerals and other substances than the hard。
5. Against crushed ultra-high viscosity material。